Publications

2018

  1. Le Zhao, Nitisha Ahuja, Xiucheng Zhu, Zhihao Zhao, Seong-Young Lee, “PROCI-D-17-00420: The Topology and Splashing Characteristics of a Single Droplet Impinging on a Flat Plate,” Submitted to 37th International Symposium on Combustion, 2017.
  2. Meng Tang, Jiongxun Zhang, Tyler Menucci, Henry Schmidt, Jeffrey Naber, Seong-Young Lee, Tom Tzanetakis, “PROCI-D-17-00931: Experimental Spray Ignition, Lift-off and Soot Forming Characteristics of High Reactivity Gasoline and Diesel Fuels,” Submitted to 37th International Symposium on Combustion, 2017.
  3. Khanh Duc Cung, Moiz Ahmed, Xiucheng Zhu, Seong-Young Lee, “PROCI-D-17-01677: Mechanism of Lift-Off Length and Ignition in Dimethyl Ether (Dme) Reacting Spray Using a Single-Hole Injector,” Submitted to 37th International Symposium on Combustion, 2017.
  4. Seong-Young Lee, Khanh T Cung, Ahmed Abdul Moiz, Le Zhao, Xiucheng Zhu, “PROCI-D-17-01432: Mechanism of Ignition and Flame Stabilization of High Injection Pressure Dimethyl Ether (DME) Sprays,” Submitted to 37th International Symposium on Combustion, 2017.
  5. Le Zhao, Nitisha Ahuja, Xiucheng Zhu, Zhihao Zhao, Seong-Young Lee, “Splashing Criterion and Topological Features of a Single Droplet Impinging on the Flat Plate,” SAE 2018-01-0289,
  6. Le Zhao, Xiucheng Zhu, Zhihao Zhao, Nitisha Ahuja, Jeffrey Naber, Seong-Young Lee, “High Pressure Impinging Spray Film Formation Characteristics,” SAE 2018-01-0312,
  7. Le Zhao, Roberto Torelli, Xiucheng Zhu, Sibendu Som, Riccardo Scarcelli, Jeffrey Naber, Mehdi Raessi, Seong-Young Lee, “Evaluation of Diesel Spray-wall Interaction and Morphology around Impingement Location,” SAE 2018-01-0276,
  8. Meng Tang, Yuanjiang Pei, Yu Zhang, Tom Tzanetakis, Michael Traver, David Cleary, Shaoping Quan, Jeffrey Naber, Seong-Young Lee, “Development of a Transient Spray Cone Angle Correlation for CFD Simulations at Diesel Engine Conditions,” SAE 2018-01-0304,
  9. David P. Markt, Ashish Pathak, Mehdi Raessi, Roberto Torelli, Sibendu Som, Riccardo Scarcelli, Seong-Young Lee, Jeffrey Naber, “Using a DNS Framework to Test a Splashed Mass Sub-Model for Lagrangian Spray Simulations,” SAE 2018-01-0297,

2017

  1. Haiwen Ge, Jaclyn E. Johnson, Hari Krishnamoorthy, Seong-Young Lee, Jeffrey D. Naber, Nan Robarge, and Eric Kurtz, “A Comparison of CFD Predicted Initial Liquid Penetration Using ROI Profiles Generated Using Two Different Measurement Techniques,” DOI: 10.1177/1468087417746475, International Journal of Engine Research, December 2017.
  2. Ahmed Abdul Moiz, Khanh D. Cung, and Seong-Young Lee, “Ignition, Lift-off and Soot Formation in Double Injection Spray-Flames,” International Journal of Engine Research, DOI: 10.1177/1468087417700778, 21, 2017.
  3. Meng Tang, Jiongxun Zhang, Xiucheng Zhu, Kyle Yeakle, Henry Schmidt, Seong-Young Lee, Jeffrey Naber, Cody Squibb, “Comparison of Direct-Injection Spray Development of E10 Gasoline to a Single and Multi-Component E10 Gasoline Surrogate,” SAE Int. J. Fuels Lubr.10(2):2017, doi:10.4271/2017-01-0833, March, 2017. (ISSN 1946-3960), 2017.
  4. Le Zhao, Roberto Torelli, Xiucheng Zhu, Riccardo Scarcelli, Sibendu Som, Henry Schmidt, Jeffrey Naber, and Seong-Young Lee, “An experimental and modeling study of diesel spray impingement on a flat plate,” SAE Int. J. Fuels Lubr.10(2):2017, doi:10.4271/2017-01-0854, March, 2017. (ISSN 1946-3960), 2017
  5. Ahmed Abdul Moiz, Khanh Cung and Seong-Young Lee, “Simultaneous Schlieren-PLIF Studies for Ignition and Soot Luminosity Visualization with Close-Coupled High Pressure Double Injections of n-Dodecane,” Journal of Energy Resources Technology 139(1), JERT 16-1272, doi: 10.1115/1.4035071, , 2017.
  6. Khanh Cung, Ahmed Abdul Moiz, Xiucheng Zhu, and Seong-Young Lee, “Ignition and Formaldehyde Formation in Dimethyl Ether (DME) Reacting Sprays Under Various EGR Level,” Comb. Inst. 36(3): 3605-3612, 10.1016/j.proci.2016.07.054, November 2017.
  7. Lee, Seong-Young, Ahmed Abdul Moiz, and Khanh Cung, Turbulent Spray Combustion, Chapter 5 (pp. 277 – 312) in Droplets and Sprays: Applications for Combustion and Propulsion, Edited by S. Basu, A. Agarwal, A. Mukhopadhyay, and C. Patel, Springer Press, 2017.
  8. Lorenzo Sforza, Tommaso Lucchini, Angelo Onorati, Xiucheng Zhu, and Seong-Young Lee, “Modeling ignition and premixed combustion including flame stretch effects,” SAE 2017-01-0553, April, 2017.
  9. Sathya Prasad Potham, Le Zhao, and Seong-Young Lee, “Numerical study on evaporation of spherical droplets impinging on the wall using Volume of Fluid (VOF) model,” SAE 2017-01-0852, April, 2017.
  10. Xiucheng Zhu, Le Zhao, Zhihao Zhao, Nitisha Ahuja, Jeff Naber, and Seong-Young Lee, “An Experimental Study of Diesel Spray Impingement on a Flat Plate: Effects of Injection Conditions,” 28th Conference on Liquid Atomization and Spray Systems, 6-8 September 2017, Valencia, Spain, 2017.
  11. Meng Tang, Jiongxun Zhang, Tyler Menucci, Henry Schmidt, Seong-Young Lee, Jeffrey Naber, Tom Tzanetakis, “Experimental Investigation of Spray Characteristics of High Reactivity Gasoline and Diesel Fuel Using a Heavy-Duty Single-Hole Injector, Part I: Non-Reacting, Non-Vaporizing Sprays,” ILASS-Americas 29th Annual Conference on Liquid Atomization and Spray Systems, Atlanta, GA, May 2017.
  12. Jiongxun Zhang, Meng Tang, Tyler Menucci, Henry Schmidt, Seong-Young Lee, Jeffrey Naber, Tom Tzanetakis, “Experimental Investigation of Spray Characteristics of High Reactivity Gasoline and Diesel Fuel Using a Heavy-Duty Single-Hole Injector, Part II: Non-Reacting, Vaporizing Spray,” ILASS-Americas 29th Annual Conference on Liquid Atomization and Spray Systems, Atlanta, GA, May 2017.
  13. Ahmed Abdul Moiz, Le Zhao, Seong-Young Lee, “Large eddy simulation of Dimethyl Ether (DME) reacting spray flame at compression ignition (CI) engine relevant conditions,” 10th National Combustion Meeting, April, 2017.
  14. Le Zhao, Xiucheng Zhu, Seong-Young Lee, “Experimental and Numerical Study of DME and Diesel in a Constant Volume Combustion Vessel,” 10th National Combustion Meeting, April, 2017.
  15. Meng Tang, Seong-Young Lee, Jeff Naber, “Experimental Spray Ignition and Soot Forming Characteristics of High Reactivity Gasoline and Diesel Fuel Using a Heavy-Duty Single-Hole Injector,” 10th National Combustion Meeting, April, 2017.
  16. Xiucheng Zhu, Khanh D. Cung, Ahmed Abdul Moiz, and Seong-Young Lee, “17PFL-1003: Experimental Investigation of Injection Pressure Effect on Spray and Combustion of Dimethyl Ether (DME) in a Pressurized Combustion Vessel,” Presentation of 2017 SAE World Congress, 2017.
  17. Le Zhao, Sathya Prasad Potham, and Seong-Young Lee, “Numerical Study of Droplet Evaporation on a Flat Plate Using Volume of Fluid (VOF) Method,” IMEM-2017, Engine Modeling User’s Group Meeting at theSAE Congress (IMEM) Detroit,

2016

  1. Ahmed Abdul Moiz, Muhsin M Ameen, Seong-Young Lee, and Sibendu Som, “Study of soot production for double injections of n-dodecane in CI engine-like conditions,” Combustion and Flame 173:123-131, November
  2. Khalid Zouhri and Seong-Young Lee, “Evaluation and Optimization of the Alkaline Water Electrolysis Ohmic Overpotential: Exergy Study,” International Journal of Hydrogen Energy, DOI: 10.1016/j.ijhydene.2016.03.119, April, 2016.
  3. Khanh Cung, Xiucheng Zhu, Ahmed Abdul Moiz, and Seong-Young Lee, William De Ojeda, “Characteristics of Formaldehyde (CH2O) Formation in Dimethyl Ether (DME) Spray Combustion using PLIF Imaging,” SAE Int. J. Fuels Lubr. 9(1):138-148, 2016, doi:10.4271/2016-01-0864, April, 2016.
  4. Khalid Zouhri and Seong-Young Lee, “Analysis and Assessment of Dye-sensitized Solar Cell at Different Materials Parameters and Environmental Conditions,” International Journal of Energy Research, DOI: 10.1002/er.3503:1-12, February, 2016.
  5. Xiucheng Zhu, Lorenzo Sforza, Tejas Ranadive, Anqi Zhang, Seong-Young Lee, Jeffrey Naber, Tommaso Lucchini, Angelo Onorati, Muniappan Anbarasu, Yangbing Zeng, “Experimental and Numerical Study of Flame Kernel Formation Processes of Propane-Air Mixture in a Pressurized Combustion Vessel,” SAE Int. J. Engines 9(3):2016, doi:10.4271/2016-01-0696, April, 2016.
  6. Khalid Zouhri, Seong-Young Lee, “Tubular SOFC Air Electrode Ohmic Overpotential: Parametric and Exergy Study,” Energy Conversion and Management March 2016, 2016 ECM-D-16-00660R1, March, 2016.
  7. Khalid Zouhri and Seong-Young Lee, “Exergy Study on the Effect of Material Parameters and Operating Conditions on the Anode Diffusion Polarization of the SOFC,” International Journal of Energy and Environmental Engineering, DOI 10.1007/s40095-015-0201-1:1-14, January, 2016.
  8. Tang, L. Zhao, S.-Y. Lee, and J. Naber, “Effect of Combustion on Diesel Spray Penetration and Vaporization,” SAE 2016 International Powertrains, Fuels & Lubricants, SAE 2016-01-2201, 2016.
  9. Allocca, M. Costa, S.-Y. Lee, A. Montanaro, D. Piazzullo, V. Rocco, “Schlieren and Mie Scattering Techniques for the ECN “Spray G” Characterization and 3D CFD Model Validation,” Fourth International Conference on Computational Methods for Thermal Problems, ThermaComp2016, July 6-8, 2016, Georgia Tech, Atlanta, USA, 2016.
  10. Anqi Zhang, Riccardo Scarcelli, Seong-Young Lee, Thomas Wallner, and Jeffrey Naber, “Numerical Investigation of Spark Ignition in Lean and Dilute Methane/Air Mixture Using Detailed Energy Deposition Model,” SAE 2016-01-0609, April, 2016.
  11. Le Zhao, Ahmed Abdul Moiz, Jeffrey Naber, Seong-Young Lee, William Atkinson, and Sam Barros, “Investigation of multi hole colliding jet high pressure spray characteristics under Gasoline Engine Conditions,” SAE 2016-01-0847, April, 2016.
  12. Le Zhao; Sanjeet Limbu, Sathya Prasad Potham, Seong-Young Lee, Jeffrey Naber, William Atkinson, and Sam Barros, “Numerical simulations for spray characterization of uneven multiple jet-to-jet impingement injectors,” SAE 2016-01-0864, April, 2016.
  13. Xiucheng Zhu, Sanjeet Limbu, Khanh Cung, William de Ojeda, and Seong-Young Lee, “HEUI Injector Modeling and ROI Experiments for High Injection Pressure of Diesel and Dimethyl Ether (DME),” SAE Technical Paper 2016-01-0855, 2016, doi:10.4271/2016-01-0855, 2016.
  14. Anqi Zhang and Seong-Young Lee, “Towards Further Understanding of Spark Ignition Process: Experimental and Numerical Approaches,” 52th Spring Combustion Conference, South Korea, May 12th, 2016.

2015

  1. Khanh Cung, Ahmed Moiz, Jaclyn Johnson, Seong-Young Lee, Chol-Bum Kweon, Alessandro Montanaro, “Spray-Combustion Interaction of Multiple Injections under Diesel Engine Condition,” Combust. Inst. (2015), http://dx.doi.org/10.1016/ j.proci.2014.07.054, (35)3:3061-3068, August 2015.
  2. Abdul Moiz, Sibendu Som, Luis Bravo, and Seong-Young Lee, “Experimental and Numerical Studies on Combustion Model Selection for Split Injection Spray Combustion,” SAE 2015-01-0374, April, 2015.
  3. Le Zhao, Ahmed Abdul Moiz, Jeffrey Naber, Seong-Young Lee, Sam Barros, and William Atkinson, “High-speed Spray-to-Spray Collision Efficiency in Two-hole Impinging Jet Nozzles,” SAE 2015-01-0948, April, 2015.
  4. Khanh Cung, Jaclyn Johnson, and Seong-Young Lee, “Development of Chemical Kinetic Mechanism for Dimethyl Ether (DME) with Comprehensive Polycyclic Aromatic Hydrocarbon (PAH) and NOx Chemistry,” SAE 2015-01-0807, April, 2015.
  5. Montanaro, A., Allocca, L., Zhang, A., Lee, S.-Y., “Correlation characteristics of laser-induced soot incandescence and flame luminosity in diesel spray combustion,” Proceedings of the European Combustion Meeting, April, 2015.
  6. Abdul Moiz and Seong-Young Lee, “Coupled Luminosity- Heat Release Rate Analysis for Split Injection Diesel Flame,” Proceedings of the 9th U.S. National Combustion Meeting, Cincinnati OH, May, 2015.
  7. Parajuli, G. Mittal, S. Gupta, Seong-Young Lee, K. Cung “A rapid compression machine study of DME autoignition,” Proceedings of the 9th U.S. National Combustion Meeting, Cincinnati OH, May, 2015.
  8. Khanh Cung, Anqi Zhang, and Seong-Young Lee, “Ignition and Formaldehyde Formation Process in Dimethyl Ether Spray Combustion: Experiment and Chemical Modeling,” Proceedings of the 9th U.S. National Combustion Meeting, Cincinnati OH, May, 2015.
  9. Meng Tang, Le Zhao, Seong-Young Lee, and Jeffrey Naber, “Development of Fuel Surrogate Methodology and Validation Under Engine-like Conditions,” Proceedings of the 9th U.S. National Combustion Meeting, Cincinnati OH, May, 2015.
  10. Abdul Moiz, Le Zhao, Jeffrey Naber, Seong-Young Lee, Sam Barros, and William Atkinson, “Jet-To-Jet Collision Studies of a Novel High-Pressure Two-hole Injector under Gasoline Engine Conditions,” ILASS-America, May, 2015.
  11. Abdul Moiz and Seong-Young Lee, “Combustion Model Selection for Split Injection Diesel Spray Combustion,” Ninth Mediterranean Combustion Symposium 2015, June, 2015.

2014

  1. Anqi Zhang, Alessandro Montanaro, Luigi Allocca, Jeffrey Naber, and Seong-Young Lee, “Measurement of Diesel Spray Formation and Combustion upon Different Nozzle Geometry using Hybrid Imaging Technique,” SAE Int. J. Engines 7(2):2014, doi:10.4271/2014-01-1410, 2014.
  2. Hai-Wen Ge, Michael Norconk, Seong-Young Lee, Jeffrey Naber, Steve Wooldridge, and James Yi, “PIV measurement and numerical simulation of fan-driven flow in a constant volume combustion vessel,” Applied Thermal Engineering 64:19-31, 2014.
  3. Anqi Zhang, Jeffrey Naber, and Seong-Young Lee, “An Experimental Study of Flame Kernel Evolution in Lean and Diluted Methane-Air Mixtures at Elevated Pressures,” Sci. Technol., 186: 988–1004, 2014. DOI: 10.1080/00102202.2014.900057, 2014.
  4. Alessandro Montanaro, Luigi Allocca, Marianna Migliaccio, Valentina Fraioli, Seong-Young Lee, Anqi Zhang, Jeffrey Naber, “Schlieren and Mie-scattering Visualization for Single-Hole Diesel Injector under Vaporizing Conditions with Numerical Validation,” SAE 2014-01-1406, 2014, doi:10.4271/2014-01-1406, 2014.
  5. Sreenath Gupta, Bikash Parajuli, Gaurav Mittal, Khanh Cung, Jaclyn Johnson, Seong-Young Lee, and Grzegorz Siuchta, “RCM studies of DME ignition and combustion under highly diluent conditions,” 6th international DME Conference, 2014.
  6. Khanh Cung, Chunqiu Guo, Jaclyn Johnson, Seong-Young Lee, and Willy de Ojeda, “High-pressure Oil Intensified DME Fuel Injection System Development for Engine-Condition Spray Combustion,” 6th international DME Conference, 2014.
  7. Khanh Cung, Jaclyn Johnson, Seong-Young Lee, Sreenath Gupta, and Gregory Siuchta, “EXPERIMENTAL AND NUMERICAL STUDY OF HIGH PRESSURE DME INJECTION UNDER DIESEL ENGINE CONDITIONS,” 6th international DME Conference, 2014.
  8. Khanh D. Cung, Jaclyn E. Johnson, Seong-Young Lee, Sreenath Gupta, Gregory Siuchta, “248ACS_DME- Numerical simulation of High Pressure Dimethyl Ether (DME) Injection under Diesel Engine Conditions,” ACS DME Symposium
American Chemical Society National Meeting, 2014.

2013

  1. Anqi Zhang, Khanh Cung, Seong-Young Lee, Jeffrey Naber, Garlan Huberts, Michael Czekala, and Qiuping Qu, “The Impact of Spark Discharge Pattern on Flame Initiation in a Turbulent Lean and Dilute Mixture in a Pressurized Combustion Vessel,” SAE Int. J. Engines 6(1):2013, doi:10.4271/2013-01-1627, 2013.
  2. Jaclyn E. Johnson, Jeffrey D. Naber, Seong-Young Lee, E. Kurtz, H-W Ge, and N. Robarge, “Investigation of Key Mechanisms for Liquid Length Fluctuations in Transient Vaporizing Diesel Sprays,” SAE Int. J. Engines 6(2):2013, doi:10.4271/2013-01-1594, 2013.
  3. Montanaro, L. Allocca, J. Johnson, S.-Y. Lee, J. Naber, and A. Zhang, “Influence of the Nozzle Geometry of a Diesel Single-hole Injector on Liquid and Vapor Phase Distributions at Engine-like Conditions,” SAE2013-24-0088, 2013.
  4. E. Johnson, J. D. Naber, S.-Y. Lee, G. Hunter, R. Truemner, and T. Harcombe, “Correlations of Non-vaporizing spray penetration for 3000 bar Diesel Spray Injection,” SAE2013-24-0033, 2013.
  5. Meghraj Bhagat, Khanh D. Cung, Jaclyn Johnson, Jeffrey D. Naber, Seong-Young Lee, and Sam Barros, “Experimental and Numerical Study of Water Spray Injection at Engine-Relevant Conditions,” SAE2013-01-0250, 2013.
  6. Khanh D. Cung, Meghraj Bhagat, Anqi Zhang, and Seong-Young Lee, “Numerical Studies on the Emission Characteristics of High-Pressure Dimethyl Ether (DME) under Different Ambient Conditions,” SAE2013-01-0319, 2013.
  7. Khanh D. Cung, Anqi Zhang, Jeffrey Naber, Seong-Young Lee, Chol-Bum Kweon, Alessandro Montanaro, Luigi Allocca, “investigation of Two-Stage fuel injection on combustion intensity and soot formation under diesel engine conditions,” Fall Technical Meeting of the Western States Section of the Combustion Institute, Oct. 2013.
  8. Khanh D. Cung, Jaclyn E. Johnson, Jeffrey D. Naber, and Seong-Young Lee, “EVALUATION OF JP-8 SURROGATE UNDER SPRAY DIESEL CONDITIONS USING DETAILED CHEMICAL KINETIC MODEL,” 2013 NDIA GROUND VEHICLE SYSTEMS ENGINEERING and TECHNOLOGY SYMPOSIUM, Power & Mobility (P&M) Mini-Symposium, August 21-22, 2013 – Troy, Michigan.
  9. Jaclyn E. Johnson, Khanh D. Cung, Anqi Zhang, Jeffrey D. Naber, and Seong-Young Lee, “Spray & Liquid Length Characteristics of Tetradecane as a Surrogate in Comparison To Jp-8,” 2013 NDIA Ground Vehicle Systems Engineering and Technology Symposium, Power & Mobility (P&M) Mini-Symposium, August 21-22, 2013 – Troy, Michigan, 2013.
  10. Allocca L., Lee S.-Y., Marchitto L., Montanaro A., Naber J., and Zhang A., “Effects of the Nozzle Geometry on Fuel Dispersion in Non-Evaporative and Evaporative Conditions for a Diesel Injector,” ILASS – Europe 2013, 25th European Conference on Liquid Atomization and Spray Systems, Chania, Greece, 1-4 September 2013.
  11. Montanaro, A., Allocca, L., Zhang, A., Johnson, J., Lee, S.-Y., “Nozzle geometry influence on the diesel spray combustion,” Proceedings of the European Combustion Meeting, 2013.
  12. Anqi Zhang and Seong-Young Lee, “Visualization of Diesel Spray Characteristics under Various Conditions Using a Hybrid Schlieren/Mie Scattering Imaging System” UKC2013, New York, NY, August 2013.
  13. Anqi Zhang, Alessandro Montanaro, Luigi Allocca, and Seong-Young Lee, “Experimental Study of Diesel Spray Combustion Characteristics Using a Constant-volume Combustion Vessel,” 9th Asia-Pacific Conference on Combustion, Korea, 20

2012

  1. Nesbitt, J. Naber, and S.-Y. Lee, “Characterizing Diesel Fuel Spray Cone Angle from Back-Scattered Imaging by Fitting Gaussian Profiles to Radial Spray Intensity Distributions,” Journal of Engineering for Gas Turbines and Power, Paper No. GTP-11-1349, 2012.
  2. Meijer, B. Somers, J. Johnson, J. Naber, S.-Y. Lee, L-M. Malbec, G. Bruneaux, L.M. Pickett, M. Bardi, R. Payri, and T. Bazyn, “Engine Combustion Network (ECN): Characterization and Comparison of Boundary Conditions for Different Combustion Vessels,” Atomization and Spray 22(9):777-806, 2012.
  3. Cung, A. Zhang, and S.-Y. Lee, “Numerical Study on Soot Precursor of JP-8 Surrogate under Diesel Conditions Using a Two-Stage Lagrangian (TSL) Model,” Proceedings of the 8th International Conference on Modeling and Diagnostics for Advanced Engine Systems, COMODIA 337- 342, 2012.
  4. H., Yoon, A. Zhang, K. Cung, J. Johnson, J. Naber, and S.-Y. Lee, “Experimental Investigation of Flame Propagation and Combustion Characteristics of Methane – Air Mixtures under EGR Conditions in a Constant-Volume Combustion Vessel,” Proceedings of the 8th International Conference on Modeling and Diagnostics for Advanced Engine Systems, COMODIA 78 – 83, 2012.
  5. Johnson, J. Naber, S.-Y. Lee, E. Kurtz, N. Robarge, and H.-W. Ge, “Investigation of Diesel Liquid Spray Penetration Fluctuations Under Vaporizing Conditions,” SAE Paper No. 2012-01-0455, 2012.
  6. -Y. Lee, J. Nesbitt, and J. Naber, “Diesel Spray Soot Formation in Engine Cylinder Conditions,” UKC2012, Irvine, CA, August 2012.
  7. Johnson, S.H., Yoon, S.-Y. Lee, and J. Naber, “Quantifying Statistical Measures of Diesel Spray Soot Characteristics using Laser-Induced Incandescence,” ICLASS 2012, 12th Triennial International Conference on Liquid Atomization and Spray Systems, Heidelberg, Germany, September 2-6, 2012.
  8. Johnson, S.H., Yoon, J. Naber, S.-Y. Lee, G. Hunter, R. Truemner, and T. Harcombe, “Characteristics of 3000 bar Diesel Spray Injection under Non-Vaporizing and Vaporizing Conditions,” ICLASS 2012, 12th Triennial International Conference on Liquid Atomization and Spray Systems, Heidelberg, Germany, September 2-6, 2012.
  9. Cung, A. Zhang, and S.-Y. Lee, “Soot Formation Study in JP-8 with Detailed Chemical Kinetics under Diesel Engine Conditions Using a Two-Stage Lagrangian (TSL) Model,” Spring Technical Meeting of the Central States Section of the Combustion Institute, 2012.
  10. H., Yoon, A. Zhang, K. Cung, J. Naber, and S.-Y. Lee, “Experimental Investigation of the Flame Propagation and Combustion Characteristics of Lean Methane-Air Mixture in a Constant-Volume Combustion Vessel,” Spring Technical Meeting of the Central States Section of the Combustion Institute, 2012.

2011

  1. Litzinger, M. Colket, M. Kahandawala, S.-Y. Lee, D. Liscinsky, K. McNesby, R. Pawlik, M. Roquemore, R. Santoro, S. Sidhu, and S. Stouffer, “Fuel Additive Effects on Soot across a Suite of Laboratory Devices, Part 2: Nitroalkanes,” Combustion Science and Technology, 183(8):739 — 754, 2011.
  2. Ding, R. Arora, M. Norconk, and S.-Y. Lee, “Numerical Investigation of Diluent Influence on Flame Extinction Limits of Lean-Premixed H2-CO (Syngas),” International Journal of Hydrogen Energy, 36(4): 3222-3231, 2011.
  3. Bouvet, C. Chauveau, I. Gokalp, S.-Y. Lee, and R. Santoro, “Characterization of Syngas Laminar Flames Using the Bunsen Burner Configuration,” International Journal of Hydrogen Energy, 36(1):992-1005, 2011.
  4. Nesbitt, S. Johnson, L. Pickett, D. Siebers, S.-Y. Lee, and J.D. Naber, “Minor Species Production from Lean Premixed Combustion and Their Impact on Autoignition of Diesel Surrogates,” Energy Fuels 25(3):926-936, 2011.
  5. Morgan, R. Arora, J. Nesbitt, S.-Y. Lee, and J. Naber, “Characterization of Gasoline and E85 Direct Injection Sprays in a Constant Volume Vessel Under Late Cycle Engine Conditions,” ASME Digital Library, ICEF2011-60009: pp.307-316, http://dx.doi.org/10.1115/ICEF2011-60009, 2011.
  6. Arora, C. Morgan, J. Naber, and S.-Y. Lee, “Flash Boiling Spray Characterization of a Gasoline Multi-hole Injector in a Heated Pressure Vessel,” ILASS Americas, 23rd Annual Conference on Institute of Liquid Atomization and Spray Systems, Ventura, CA, May 2011.
  7. Nesbitt, J. Naber, S.-Y. Lee, E. Kurtz, H.-W. Ge, and N. Robarge, “Investigation of Vaporizing Diesel Liquid Spray Plume to Plume Penetration Variations,” ILASS Americas, 23rd Annual Conference on Institute of Liquid Atomization and Spray Systems, Ventura, CA, May 2011.
  8. Norconk, S.-Y. Lee, and J. Prausa, “3-D Stereo PIV Measurement of Swirling Flows In a Model Gas Turbine Combustor,” 9th International Symposium on Particle Image Velocimetry – PIV11, 2011.
  9. Norconk, and S.-Y. Lee, “Characterization of Non-Reacting and Reacting Swirled Flows Using 3-Dimensional (Stereo) PIV,” AIAA Aerospace Sciences Meeting, Control Number: 89734, January, 2011.

2010

  1. Seo and S.-Y. Lee, “Effects of Unmixedness on Combustion Instabilities in a Lean-Premixed Gas Turbine Combustor,” Flow, Turbulence and Combustion 85: 95-112, 2010.
  2. Mensch, R. Santoro, T. Litzinger, and S.-Y. Lee, “Sooting Characteristics of Surrogates for Jet Fuels,” Combustion and Flame 157:1097-1105, 2010.
  3. Nesbitt, S.-Y. Lee, J. Naber, and R. Arora, “An Optical Study of Spark Ignition and Flame Kernel Development Near the Lean Limit at Elevated Pressure,” ASME Digital Library, ICEF2010-35136: pp. 431-440, http://dx.doi.org/10.1115/ICEF2010-35136, 2010.
  4. Nesbitt, J. Naber, and S.-Y. Lee, “Characterizing Diesel Fuel Spray Cone Angle from Back-Scattered Imaging by Fitting Gaussian Profiles to Radial Spray Intensity Distributions,” ASME Digital Library, ICEF2011-60034: pp. 349-360, http://dx.doi.org/10.1115/ICEF2011-60034, 2010.
  5. Ding, M. Norconk, and S.-Y. Lee, “Numerical Investigation of Emission Characteristics of H2-CO Fuel in a Counterflow Premixed Flame,” Proceedings of the 2010 Technical Meeting of the Central States Section of The Combustion Institute, March, 2010.
  6. Bouvet, N., Chauveau, C., Gökalp, I., Lee, S.-Y., Santoro, R.J., “Laminar flame speed study of syngas mixtures (H2-CO) with straight and nozzle burners,” 27th Annual International Pittsburgh Coal Conference 2010, PCC, 3:2130-2141, 2010.

2009

  1. -Y. Lee, S.R. Turns, and R.J. Santoro, “Measurement of Soot, OH Radical and PAH Concentrations in Turbulent Ethylene/Air Jet Flames,” Combustion and Flame 156: 2264-2275, 2009.
  2. Mordaunt, S.-Y. Lee, V. Kalaskar, A. Mensch, R. Santoro, and H. Schobert, “Further Studies of Alternative Jet Fuels,” ASME Digital Library, IMECE2009-12940: pp. 53-62
    http://dx.doi.org/10.1115/IMECE2009-12940, 2009.
  3. Johnson, J. Nesbitt, S.-Y. Lee, and J. Naber, “Premixed Combustion of Acetylene-Hydrogen Fuel Mixtures for Thermodynamic State Generation in a Constant Volume Combustion Vessel,” Journal of KONES, Powertrain and Transport, 16 (2), pp. 199-208, 2009.
  4. Litzinger, M. Colket, M. Kahandawala, V. Katta, S.-Y. Lee, D. Liscinsky, K. McNesby, R. Pawlik, M. Roquemore, R. Santoro, S. Sidhu, S. Stouffer, and J. Wu, “Fuel Additive Effects on Soot across a Suite of Laboratory Devices, Part 1: Ethanol,” Combustion Science and Technology 181:310-328, 2009.
  5. Katta, W. Roquemore, A. Menon, S.-Y. Lee, R. Santoro, and T. Litzinger, “Impact of Soot on Flame Flicker,” Proceedings of the Combustion Institute 32: 1343-1350, 2009.
  6. Gothaniya, G., Lee, S.-Y., Menon, A. V., Iyer, S., Linevsky, M. J., Santoro, R. J. and Litzinger,
    A., “A Study on the Effect of Experimental Setup Configuration on Soot Formation in a Laminar Premixed Ethylene-Air Flame,” Chapter 42 in Combustion Generated Fine Carbonaceous Particles, Karlsruhe University Press, 2009.
  7. Arora, N. Ding, and S.-Y. Lee, “Investigation of Effects of Strain Rate and Diluents on Extinction Limits of Premixed Syngas Flame,” Fall Technical Meeting of the Western States Section of the Combustion Institute, Oct. 2009.
  8. -Y. Lee, “A Study of the Simultaneous Soot and Temperature Measurements Using the CARS System in a Turbulent Ethylene-Air Jet Flame,” Proceedings of the 6th U.S. National Combustion Meeting, May 2009.
  9. Johnson, J. Nesbitt, S.-Y. Lee, and J. Naber, “Premixed Combustion for Acetylene-Hydrogen Fuel Mixtures used in a Constant Volume Combustion Vessel for Thermodynamic State Generation,” 4th European Combustion Meeting, Vienna, Austria, April 14-17, 2009.
  10. Mensch, R. Santoro, T. Litzinger, and S.-Y. Lee, “Sooting Characteristics of Surrogates for Jet Fuels,” AIAA 2009-1525, 47th AIAA Aerospace Sciences Meeting, January, 2009.

Before 2019

  1. Balster, E. Coporan, M. Dewitt, T. Edwards, J. Ervin, J. Graham, S.-Y. Lee, S. Pal, D. Phelps, L. Rudnick, R. Santoro, H. Schobert, L. Shafer, R. Striebich, Z. West, G. Wilson, R. Woodward, and S. Zabarnick, “Development of an Advanced, Thermally Stable, Coal-based Jet Fuel,” Fuel Processing Technology 89:364-378, 2008.
  2. Santoro and S.-Y. Lee, “Pulse Detonation Engines: Progress and Challenges,” International Journal of Energetic Materials and Chemical Propulsion, DOI: 10.1615/IntJEnergeticMaterialsChemProp.v6.i4.30: pages 441-461, 2007.
  3. Iyer, T. Litzinger, S.-Y. Lee, and R. Santoro, “Determination of Soot Scattering Coefficient from Extinction and Three-angle Scattering in a Laminar Diffusion Flame,” Combustion and Flame, 149:206-216, 2006.
  4. Menon, S.-Y. Lee, M. Linevsky, T. Litzinger, and R. Santoro, “Addition of NO2 to a Laminar Premixed Ethylene-air Flame: Effect on Soot Formation,” Proceedings of the Combustion Institute, 31:593-601, 2006.
  5. Wu, K. Song, T. Litzinger, S.-Y. Lee, R. Santoro, M. Linevsky, M. Colket, and D. Licinsky, “Reduction of PAH and Soot in Premixed Ethylene-air Flames by Addition of Ethanol,” Combustion and Flame, 144(4): 675-687, 2006.
  6. Wu, K. Song, T. Litzinger, S.-Y. Lee, R. Santoro, and M. Linevsky, “Reduction of PAH and Soot in Premixed Ethylene-air Flames by Addition of Dimethyl Ether,” Combustion Science and Technology, 178(5):837-863, 2006.
  7. -Y. Lee, J. Watts, S. Saretto, S. Pal, C. Conrad, R. Woodward, and R. J. Santoro, “Deflagration to Detonation Transition Processes by Turbulence-Generating Obstacles in Pulse Detonation Engines,” Journal of Propulsion and Power, 20(6):1026-1036, 2004.
  8. Saretto, S.-Y. Lee, J. Brumberg, C. Conrad, S. Pal, and R. J. Santoro, “Studies of Detonation Transition in a Gradual Area Expansion for Multi-Cycle PDE Applications,” Proceedings of the Combustion Institute, 30:775-782, 2004.
  9. -Y. Lee, M. McKeand, S. Saretto, S. Pal, C. Mordaunt, and R. J. Santoro, “Combustion Performance of Coal-based Fuels In a Model Gas Turbine Combustor,” American Chemical Society, Division of Petroleum Chemistry, 4th ed., vol. 49:513-516, 2004.
  10. -Y. Lee, S. Seo, J. Broda, S. Pal, and R. Santoro, “An Experimental Estimation of Mean Reaction Rate and Flame, Structure in a Lean-Premixed Gas Turbine Combustor,” Proceedings of the Combustion Institute, 28:775-782, 2000.
  11. Santoro and S.-Y. Lee, “Pulse Detonation Engines: Progress and Challenges,” in Book of Kenneth K. Kuo and Juan Rivera, “Advancement in Energetic Materials and Chemical Propulsions,” Begell House Inc. Publishers, p. 436-456, 2007.
  12. Santoro, S.-Y. Lee, C. Conrad, J. Brumberg, S. Saretto, S. Pal and R. Woodward, “Chapter 2 – Deflagration-to-Detonation Studies for Multicycle PDE Applications,” in Book of Gabriel Roy, “Combustion Processes in Propulsion- Control, Noise and Pulse Detonation,” Butterworth-Heinemann, p. 283-292, 2005.
  13. Saretto, S.-Y. Lee, J. Brumberg, C. Conrad, S. Pal, and R. J. Santoro, “Utilizing Localized Explosion for Detonation Transition from Small to Large Tube,” in Book of R. J. Santoro, G. Roy, S. Frolov, and S. Tsyganov, “Confined Detonations and Pulse Detonation Engines,” Torus Press. 2003.
  14. Zhang, G. Messing, S.-Y. Lee, and R. Santoro, “Formation of Solid and Hollow Spherical Particles by Spray Pyrolysis,” In Hollow and Solid Spheres and Microspheres, Science and Technology Associated with Their Fabrication and Application, Edited by D. Wilcox, Pittsburgh, PA: MRS, 1995.
  15. Bouvet, S.-Y. Lee, I. Gökalp, and R. J. Santoro, “Flame Speed Characteristics of Syngas (H2-CO) with Straight and Nozzle Burners in a Laminar Premixed Flame,” 3rd European Combustion Meeting, Chania, Crete Greece, April 11-13, 2007.
  16. Gothaniya, S.-Y. Lee, A. Menon, S. Iyer, M. Linevsky, T. Litzinger, and R. Santoro, “A Study on the Effect of Experimental Setup Configuration on Soot Formation in Laminar Premixed Ethylene-air Flame,” 5th US Combustion Meeting, San Diego, CA, March 25-28, 2007.
  17. Mckeand, A. Menon, S. Iyer, M. Linevsky, S.-Y. Lee, T. Litzinger, and R. Santoro, “Effects of NO2 on Soot Formation in a Laminar Premixed Ethylene-Air Flame,” AIAA 2006-1162, 44th AIAA Aerospace Sciences Meeting and Exhibit, 9-12 January 2006, Reno, Nevada.
  18. Salgues, G. Mouis, S.-Y. Lee, D. Kalitan, S. Pal, and R. J. Santoro, “Shear and Swirl Coaxial Injector Studies of LOX/GCH4 Rocket Combustion Using Non-Intrusive Laser Diagnostics,” AIAA 2006-07579, 44th AIAA Aerospace Sciences Meeting and Exhibit, 9-12 January 2006, Reno, Nevada.
  19. Menon, M. Linevsky, M. McKeand, S. Iyer, S.-Y. Lee, T. Litzinger, and R. Santoro, “Soot Reduction by NO2 in a Laminar Premixed Flame,” Proceedings of the Eastern States Section of the Combustion, University of Central Florida, Orlando, FL, November 13-16, 2005.
  20. Shehadeh, N. Bouvet, K. Landry, S.-Y. Lee, S. Pal, and R. Santoro., “Effect of Operating Frequency and Fill Time on PDE-Ejector Thrust Performance,” Proceedings of the Eastern States Section of the Combustion, University of Central Florida, Orlando, FL, November 13-16, 2005.
  21. Iyer, T. Litzinger, S.-Y. Lee, and R. Santoro, “In-situ Measurements of Primary Particle Diameter and Structure of Soot in a Laminar Diffusion Flame,” Proceedings of the Eastern States Section of the Combustion, University of Central Florida, Orlando, FL,  November 13-16, 2005.
  22. -Y. Lee, D. Salgues, G. Mouis, S. Pal, and R. Santoro, “Shear and Swirl Coaxial Injector Studies of LOX/CH4 Rocket Combustion Using Non-Intrusive Laser Diagnostics,” The 2005 US – Korea Conference on     Science, Technology, & Entrepreneurship, University of California at Irvine, 2005.
  23. Landry, R. Shehadeh, S.-Y. Lee, S. Pal, and R. J. Santoro, “Studies of Pulse Detonation Engine Performance Operating Under Flight Conditions,” AIAA 2005-3832, 41st AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, July 2005.
  24. Kalitan, D. Salgues, G. Mouis, S.-Y. Lee, S. Pal, and R. J. Santoro, “Experimental Liquid Rocket Swirl Coaxial Injector Study Using Non-Intrusive Optical Techniques,” AIAA 2005-4299, 41st AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, July 2005.
  25. Shehadeh, S. Saretto, S.-Y. Lee, S. Pal, and R. J. Santoro, “Thrust Augmentation Measurements for a Pulse Detonation Engine Driven Ejector,” AIAA 2004-3398, 40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, July 2004.
  26. Conrad, S. Saretto, S.-Y. Lee, and R. J. Santoro, “Studies of Overdriven Detonation Wave Transition in a Gradual Area Expansion for PDE Applications,” AIAA 2004-3397, 40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, July 2004.
  27. Shehadeh, S. Saretto, S.-Y. Lee, S. Pal, and R. Santoro, “Experimental Study of a Pulse Detonation Engine Driven Ejector,” AIAA 2003-4972, 39th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, July 2003.
  28. Imschweiler, M. McKeand, S.-Y. Lee, S. Saretto, M. Linevsky, T. Litzinger, and R. Santoro, “Fuel Additive Studies of Soot Reduction in a High-Pressure Model Gas Turbine Combustor,” AIAA 2003-5088, 39th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, July 2003.
  29. Saretto, S.-Y. Lee, C. Conrad, J. Brumberg, S. Pal, and R. Santoro, “Predetonator to Thrust Tube Detonation Transition Studies for Multi-Cycle PDE Applications,” AIAA 2003- 4825, 39th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, July 2003.
  30. Saretto, S.-Y. Lee, C. Conrad, J. Brumberg, S. Pal, and R. J. Santoro, “Compact Pre-Detonator Design Criteria for Multi-Cycle PDE Applications,” Fall Technical Meeting of the Eastern States Section of The Combustion Institute, October 2003, University Park, PA.
  31. Shehadeh, S. Saretto, S.-Y. Lee, and R. J. Santoro, “Thrust Measurements for a Pulse Detonation Engine Driven Ejector,” Fall Technical Meeting of the Eastern States Section of The Combustion Institute, October 2003, University Park, PA.
  32. Xia, T. Litzinger, S.-Y. Lee, R. Santoro, and M. Linevsky, “Effects of Fuel Composition on Soot Formation in a Turbulent Spray Burner,” Fall Technical Meeting of the Eastern States Section of The Combustion Institute, October 2003, University Park, PA.
  33. -Y. Lee, C. Conrad, J. Watts, R. Woodward, S. Pal, and R. J. Santoro, “Deflagration to Detonation Transition Study Using Simultaneous Schlieren and OH PLIF Images,” AIAA 2000-3217, 36th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, Huntsville, AL, 2000.
  34. Watts, C. Conrad, S.-Y. Lee, R. Woodward, S. Pal, and R. Santoro, “Deflagration to Detonation Transitions Studies Applied to Pulse Detonation Engines,” 25th JANNAF Air-breathing Propulsion Subcommittee Joint Meeting, Monterey, CA, 2000.
  35. Brossard, S.-Y. Lee, C. Mordaunt, J. Broda, and R. Santoro, “Effects of Swirl Injector Design and Other Important Parameters on Gas Turbine Combustion Instabilities,” 36th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, AIAA 2000-3122, 2000.
  36. -Y. Lee, C. Mordaunt, J. Brossard, and R. Santoro, “Measurement of Unburnt Fuel in a Model Gas Turbine Combustor During Combustion Instability,” Proceedings of the 2000 Technical Meeting of the Central State Section of the Combustion Institute, 2000.
  37. Brossard, S.-Y. Lee, C. Mordaunt, J. Broda, and R. Santoro, “Effect of Swirl Injector Design on Gas Turbine Combustion Instabilities,” Proceedings of the 2000 Technical Meeting of the Central State Section of the Combustion Institute, 2000.
  38. Santoro, J. Broda, C. Conrad, R. Woodward, S. Pal, and S.-Y. Lee, “Multidisciplinary Study of Pulse Detonation Engine Propulsion,” JANNAF, 36th CS/PSHS/APS Joint Meetings, 1999.
  39. -Y. Lee and R. Santoro, “Observation of Integral Length Scales of Soot Particles, OH Radicals and PAH in Turbulent Diffusion Flames,” First Joint Meeting of the U.S. Sections of the Combustion Institute: Western States, Central States, Eastern States, 1999.
  40. Seo, S.Y. Lee, J. Broda, J., and R. Santoro, “Effects of the Degree of Premixing on Combustion Instabilities in a Model Gas Turbine Combustor,” First Joint Meeting of the U.S. Sections of the Combustion Institute: Western States, Central States, Eastern States, 1999.
  41. -Y. Lee, S. Pal, and R. Santoro, “Temperature and Unmixed Fuel Measurements in Turbulent Jet Flames by Using Coherent Anti-Stokes Raman Spectroscopy,” Fall Technical Meeting, The Eastern States Section of the Combustion Institute, 1997.
  42. -Y. Lee and R. Santoro, “Imaging Studies of Soot Formation in Turbulent Ethylene Jet Flames,” Fall Technical Meeting, The Eastern States Section of the Combustion Institute, 1997.
  43. Mordaunt, C. Brossard, S.-Y. Lee, and R. J. Santoro, “Combustion Instability Studies in a High-Pressure Lean-Premixed Model Combustor under Liquid Fuel Operation,” Proc. of JPGC’01, International Joint Power Generation Conference, New Orleans, LA, 2001.
  44. Santoro, C. Conrad, S.-Y. Lee, and S. Pal., “Fundamental Multi-Cycle Studies of the Performance of Pulse Detonation Engines,” Proc. of the 15th International Symposium on Airbreathing Engines, Bangalore, India, 2001.
  45. Santoro, J. Broda, C. Conrad, R. Woodward, S. Pal, and S.-Y. Lee, “Multidisciplinary Study of Pulse Detonation Engine Propulsion,” 24th Air-breathing Propulsion Subcommittee and 36th Combustion Subcommittee Joint Meeting, Cocoa Beach, FL, CPIA Publ. 692, Vol. I, pp. 141-150, 1999.